102
Controls in detail
Locking and unlocking
Selective setting
If you frequently travel alone, you may wish
to reprogram the SmartKey with
KEYLESS-GO so when you, pull the driver’s
door handle only the driver’s door and the
fuel filler flap unlocks.
왘 Press and hold buttons Œ and ‹
simultaneously for about five seconds
until battery check lamp 5 flashes
twice.
The SmartKey with KEYLESS-GO will then
function as follows:
Unlocking driver’s door and fuel filler
flap
왘 Pull the driver’s door handle.
All turn signal lamps flash once. The
locking knob in the driver’s door moves
up. The anti-theft alarm system is
disarmed
Global unlocking
왘 Pull the door handle on the passenger
side.
All turn signal lamps flash once. The
locking knobs in the doors move up.
The anti-theft alarm system is
disarmed
Global locking
왘 Press lock button at door handle or
trunk lid.
All turn signal lamps flash three times.
The locking knobs in the doors move
down. The anti-theft alarm system is
armed.
Restoring to factory setting
왘 Press and hold buttons Œ and ‹
simultaneously for about six seconds
until battery check lamp 5 flashes
twice.
i
You can also lock the vehicle using the
lock button at trunk lid (
컄 page 103).
!
If you can no longer lock or unlock the
vehicle with the SmartKey with
KEYLESS-GO, then the batteries in the
SmartKey are discharged, the
SmartKey with KEYLESS-GO is mal-
functioning or the vehicle battery is
drained.
앫 Check the batteries in the
SmartKey (
컄 page 103) and re-
place them if necessary
(
컄 page 402).
앫 Use the mechanical key to unlock
the driver’s door (
컄 page 397) and
the trunk (
컄 page 398).
Kommentare zu diesen Handbüchern