Mercedes-Benz 2002 CLK 320 Betreibershandbuch PDF herunterladen (Seite 128)

126

Controls in detail

Lighting

왘 Turn the exterior lamp switch to

position U.

With the SmartKey in starter switch

position 1 or the KEYLESS-GO*

start/stop button pressed once, only

the parking lamps will switch on and off

automatically.

When the engine is running, the low

beam headlamps, the tail and parking

lamps, the license plate lamps, and the

side marker lamps will switch on and

off automatically.

Daytime running lamp mode

왘 Turn the exterior lamp switch to

position M or U.

When the engine is running, the low beam

headlamps are switched on.

In low ambient light conditions, the

following lamps will switch on additionally:

앫 Tail and parking lamps

앫 License plate lamps

앫 Side marker lamps

For nighttime driving you should turn the

exterior lamp switch to position B to

permit activation of the high beam head-

lamps.

Canada only

The daytime running lamp mode is manda-

tory and therefore in a constant mode.

When the engine is running, and you shift

from a driving position to position N or P,

the low beam headlamps will switch off

with a three-minute delay.

When the engine is running, and you

앫 turn the exterior lamp switch to

position C, the parking lamps

switch on additionally.

앫 turn the exterior lamp switch to

position B, the manual headlamp

mode has priority over the daytime

running lamp mode.

The corresponding exterior lamps

switch on (

컄 page 124).

The automatic headlamp feature is only an

aid to the driver. The driver is responsible for

the operation of the vehicle’s lights at all

times.

i

With the daytime running lamp mode

activated and the exterior lamp switch

in position M, the high beam head-

lamps cannot be switched on.

The high beam flasher is available at all

times.

컄컄

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 497 498

Kommentare zu diesen Handbüchern

Keine Kommentare