Mercedes-benz CL-Class 2011 Bedienungsanleitung PDF herunterladen (Seite 426)

X

Make sure that the base of the jack is

positioned directly under the jacking point.

X

Turn crank ? clockwise until jack = sits

completely on jacking point ; and the

base of the jack lies evenly on the ground.

X

Turn crank ? until the tire is raised a

maximum of 1.2 inches (3 centimeters)

from the ground.

Removing a wheel

X

Unscrew the uppermost wheel bolt

completely.

X

Screw alignment bolt : into the thread

instead of the wheel bolt.

X

Unscrew the remaining wheel bolts fully.

!

Do not place wheel bolts in sand or on a

dirty surface. The bolt and wheel hub

threads could otherwise be damaged when

you screw them in.

X

Remove the wheel.

Mounting a new wheel

G

Warning!

Always replace wheel bolts that are damaged

or rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be

repaired immediately. Do not continue to

drive under these circumstances! Contact an

authorized Mercedes-Benz Center or call

Roadside Assistance.

Incorrect wheel bolts or improperly tightened

wheel bolts can cause the wheel to come off.

This could cause an accident. Make sure to

use the correct wheel bolts.

G

Warning

Only use genuine Mercedes-Benz wheel bolts.

Other wheel bolts may come loose.

Do not tighten the wheel bolts when the

vehicle is raised. Otherwise, the vehicle could

fall off the jack.

G

Warning

Make sure to use the original length wheel

bolts when remounting the original wheel

after it has been repaired.

Wheel bolts for:

:

All light-alloy wheels

;

"Minispare" emergency spare wheel

!

Always use wheel bolts ; to mount the

"Minispare" emergency spare wheel. Using

other wheel bolts to mount the "Minispare"

424

Flat tire

Roadside Assistance

1 2 ... 421 422 423 424 425 426 427 428 429 430 431 ... 479 480

Kommentare zu diesen Handbüchern

Keine Kommentare