Mercedes-benz CL-Class 2011 Bedienungsanleitung PDF herunterladen (Seite 273)

Automatic engine switch-off

The ECO start/stop function switches the

engine off automatically if the vehicle is

braked to a standstill and the brake remains

depressed with the transmission in position

D or N.

i

You can still activate HOLD when the

vehicle is stationary, even if the engine has

been switched off automatically. It is then

not necessary to continue applying the

brakes during the automatic stop phase.

When you depress the accelerator pedal,

the engine starts automatically and the

braking effect of the HOLD function is

deactivated. Depress the accelerator pedal

carefully, as the engine must be started

first.

The engine is only switched off if:

R

the outside temperature is within the range

which is suitable for the system.

R

the engine is at normal operating

temperature.

R

the set temperature for the vehicle interior

has been reached.

R

the battery is sufficiently charged.

R

the system detects that the windshield is

not fogged up when the air-conditioning

system is switched on.

R

the hood is closed.

R

no engine relevant diagnostics are active.

R

the driver's door is closed and the seat belt

is fastened.

Automatic engine start

The engine is started automatically if you:

R

release the brake pedal when HOLD is not

activated and the transmission is in

position D or N

R

shift the transmission to position R

R

depress the accelerator pedal

R

switch off the ECO start/stop function or

switch to drive program S or M

R

unfasten your seat belt or open the driver's

door

The engine is also started automatically if:

R

the vehicle starts to roll.

R

the brake system requires this.

R

the system detects moisture on the

windshield when the air-conditioning

system is switched on.

R

the temperature in the vehicle interior

deviates from the set range.

R

the battery's condition of charge is too low.

Deactivating/activating the ECO start/

stop function

General notes

You can activate and deactivate the ECO

start/stop function using COMAND

(Y page 230).

i

You can also use the programmable

button (Y page 109) to activate and

deactivate the ECO start/stop function if

you have assigned this function to the

button.

Deactivating

X

Deactivate the ECO start/stop function

using COMAND (Y page 230):

The ECO symbol goes out and the Stop/

Start deactivated display message is

shown in the multifunction display.

i

If drive program S or M has been selected,

the ECO start/stop function is always

deactivated.

Activating

X

Activate the ECO start/stop function using

COMAND (Y page 230).

The ECO symbol and the Stop/Start

active display message is shown in the

multifunction display.

Driving

271

Driving and parking

Z

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 479 480

Kommentare zu diesen Handbüchern

Keine Kommentare