Mercedes-benz CL-Class 2011 Bedienungsanleitung PDF herunterladen (Seite 278)

R

if applied, release the electric parking

brake.

R

switch off the ignition and leave the

SmartKey in the ignition lock.

Transmission position D with ECO

start/stop function activated

The ECO start/stop function switches the

engine off automatically when the vehicle is

stationary if the vehicle is braked to a

standstill with transmission position N

engaged and the brake depressed.

For further information on the ECO start/stop

function (Y page 270).

Shifting to transmission position D

X

When the vehicle is stationary, depress the

brake pedal.

X

Push the DIRECT SELECT lever down past

the first point of resistance.

Transmission position display

The current transmission position is shown in

the multifunction display.

:

Transmission position

i

The arrows in the transmission position

display show how and into which

transmission positions you can change

using the DIRECT SELECT lever.

!

If the transmission position display in the

multifunction display is not working, you

should pull away carefully to check whether

the desired transmission position is

engaged. Ideally, you should select

transmission position D and drive program

E (drive program C on AMG vehicles) or S.

Do not restrict the shift range.

Transmission positions

B

Park position

Do not shift the transmission into

position P unless the vehicle is

stationary. The parking lock should

not be used as a brake when

parking. In addition to engaging the

parking lock, you must always

apply the electric parking brake to

secure the vehicle.

In the event of a fault in the vehicle

electronics, the transmission can

be locked in position P.

Have the vehicle electronics

checked immediately at a qualified

specialist workshop, e.g. an

authorized Mercedes-Benz Center.

C

Reverse

Only shift the transmission to R

when the vehicle is stationary.

276

Automatic transmission

Driving and parking

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 479 480

Kommentare zu diesen Handbüchern

Keine Kommentare