Mercedes-benz CL-Class 2011 Bedienungsanleitung PDF herunterladen (Seite 408)

Checking the oil level using the on-

board computer

On vehicles with a 12-cylinder engine, the oil

level can be checked using the on-board

computer. On all other models, the dipstick

must be used to check the engine oil level.

When checking the oil level:

R

park the vehicle on a level surface.

R

the engine should be switched off for

approximately five minutes if the engine is

at normal operating temperature.

X

Make sure that the SmartKey is in

position 2 in the ignition lock.

X

Press the ; or = button to select the

Service menu.

X

Press the : or 9 button to select

Engine Oil Level.

X

Press a.

The Measuring Engine Oil Level

Accurate Only When Vehicle is

Level message appears in the

multifunction display.

The measurement takes a few seconds. You

will see one of the following messages in the

multifunction display:

R

Engine Oil Level OK

R

Add1.0 l Engine OilAt Next

Refueling

R

Add1.5 l Engine OilAt Next

Refueling

R

Add2.0 l Engine OilAt Next

Refueling

X

Add oil if necessary.

If the engine is at normal operating

temperature and the ReduceEngine Oil

Level message appears, the engine oil level

is too high.

X

Have excess oil siphoned off.

!

Do not add too much oil. Adding too much

oil can result in damage to the engine or the

catalytic converter. Have excess oil

siphoned off.

If the For Engine Oil Level Ignition

Must be On message appears:

X

Turn the SmartKey to position 2 in the

ignition lock.

If the Need More Time to Check Engine

Oil Level message appears:

X

If the engine is at normal operating

temperature: repeat the measurement

after about five minutes.

If the engine is not at normal operating

temperature (e.g. if the engine was only

started briefly): repeat the measurement

after about 30 minutes.

If the Engine Oil Level Not Measurable

With Running Engine message appears:

X

Switch off the engine.

X

If the engine is at normal operating

temperature: wait about five minutes

before carrying out the measurement.

If the engine is not at normal operating

temperature, e.g. if the engine was only

started briefly: wait about 30 minutes

before carrying out the measurement.

i

If you wish to cancel the measurement,

press the % button on the multifunction

steering wheel.

Adding engine oil

H

Environmental note

When adding oil, take care not to spill any. If

oil enters the soil or waterways, it is harmful

to the environment.

!

Only use engine oils and oil filters which

have been approved for vehicles with a

service system. A list of the engine oils and

oil filters that have been tested and

approved according to the Mercedes-Benz

specifications for service products can be

found on the Internet at http://

www.mbusa.com (USA only). Further

information on tested and approved engine

oils and oil filters can be obtained from any

authorized Mercedes-Benz Center.

406

Engine compartment

Maintenance and care

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 479 480

Kommentare zu diesen Handbüchern

Keine Kommentare